תפריט

  • English
AD NumberSubjectEffective
28-10-02-01 Addition of Loop Clamps between Wheel Well Fuel Lines and Electrical Harnesses 8/03/2010
31-06-11-05R1 Separation of Main Entry Door (MED) and MED Inflateable Seal warning lights. 18/05/2011
55-07-06-07R1 Inspection and replacement of horizontal stabilizer upper scissor fitting attachment Bolts. Revision 1 of this AD supersedes the original issue. The complete text is revised as well as the compliance requirements. 10/06/2009
32-04-12-04 Replacement of the Anti-Skid Control Unit (ASCU), by a modified one. 20/01/2005
52-06-11-08 Additional procedures for verifing complete closure and locking of the Main Entry Door (MED). 12/12/2006
32-04-09-08 Main Landing Gear – Ground contact switch – Changing the installation direction of the mounting bolts. 15/12/2004
32-03-03-04R4 Inspection and repair of the outboard (wing side) main landing gear doors and adjustment of door stoppers. 20/03/2004
32-03-12-09 Installation of Warning Placards “DISCONNECT SCISSORS BEFORE TOWING. 22/02/2004
32-03-10-05R1 Inspection of Nose Wheel Steering Brackets and Centering Spring 29/02/2004
32-03-10-05 Landing Gear – Nose Wheel Steering – Inspection of Upper and Lower Steering Brackets and Centering Spring. 28/10/2003
32-03-08-05 Landing Gear – Position and Warning – Adjustment of the Main Landing Gear Ground Contact Switches. 11/11/2003
32-03-03-04R3 Inspection and repair of the outboard (wing side) main landing gear doors. 30/06/2003
35-02-07-02 Slow-opening Oxygen Shut-off Valve Installation. 31/08/2002
32-03-03-04 Inspection and repair of the outboard (wing side) main landing gear doors. 20/03/2003
54-02-06-12 Inspection of starter generator cables and replacement of cable support. 18/07/2002

זכויות יוצרים © 2015 רשות התעופה האזרחית.